How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Transmissions
Satisfied Customers: 47661
Experience:  16 yrs. experience with auto, manual, & CVT drivelines
Type Your Transmissions Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

06 sienna erratic shifting after rebuild u151e

Customer Question

06 sienna erratic shifting after rebuild u151e
Submitted: 1 year ago.
Category: Transmissions
Expert:  Chris (aka- Moose) replied 1 year ago.

I assume there are no trouble codes?

How much attention have you paid to the valve body, the symptoms are pointing to valve issues.

You want a excellent 5 star answer & I would like to be rated the same for providing it. Consider I don't know your skill level & I can't see, smell, hear, or touch the vehicle. It may take a few back and forth replies. Try your best to respond with good detail so I can do the same. I normally log in at 3pm and work late. A rating is required. Your rating me, what I type. I am not an employee of this website, nor have control over the fees or the time it took to get a response. If you rate negative or not at all you still paid, but I get nothing. I want you pleased with me and my efforts, so let me know if your experience here has come up short.

Thanks Chris

Customer: replied 1 year ago.
can I get a check ball diagram from you for this valve body
Expert:  Chris (aka- Moose) replied 1 year ago.

There is only one to my knowledge outside the valve body next to the C-3 accumulator. Toyota repair guides do not have valve body tear down views, nor recommends doing so.

Customer: replied 1 year ago.

there are 10 or eleven. i cant rmember for sure. but i could use a diagram to be safe. im pretty good with valve bodies but toyota uses square cups instead of round and it makes it a little confusing

Expert:  Chris (aka- Moose) replied 1 year ago.

Sorry but I do not have an image of them. I will opt out and let another try.