How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ebrock63 Your Own Question
ebrock63, Repair shop manager and tech
Category: Transmissions
Satisfied Customers: 32547
Experience:  Over 25yrs experience as Shop manager and tech
Type Your Transmissions Question Here...
ebrock63 is online now
A new question is answered every 9 seconds

Transmission goes into a slow shift mode - usually after a

Customer Question

transmission goes into a slow shift mode - usually after a slow bump - stopping up hill - transmission warning light - dtc saying gear shift position sensor faulty - i reset and ok for a few says
Submitted: 2 years ago.
Category: Transmissions
Expert:  ebrock63 replied 2 years ago.
I am sorry that you have not been helped yet. I just came online and saw your question
the actual fault code number, not definition is really needed. This is because some definitions obtained are generic and not model specific, so I like making sure I have the correct code number and definition before preceding with diagnostics
Customer: replied 2 years ago.
not sure if this helps - i can copy code number and send later if still on meter and send laterecu diagnostic part number 30759779 AA
ecu hardware part number(###) ###-####B
ecu hardware serial number 000002091303
Expert:  ebrock63 replied 2 years ago.
The ecu part and serial numbers dont help. I do need the DTC(diagnostic trouble code) number
Customer: replied 2 years ago.
will do
Expert:  ebrock63 replied 2 years ago.