How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Transmissions
Satisfied Customers: 1760
Experience:  16 yrs. experience with auto, manual, & CVT drivelines
Type Your Transmissions Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

Dodge Dakota: I am researching the "No bus" problem and the

Customer Question

I am researching the "No bus" problem and the transmission indicator going from p r n d . . . Had error codes 920, 921, 960, 999. Replace crankshaft sensor. It started and ran after that for awhile. Then died again. Got a new PCM. Still the same. I've tried some of the other suggestions such as disconnecting sensors. I don't have an ODB but I can borrow one from a friend. ANy suggestions?
Submitted: 2 years ago.
Category: Transmissions
Expert:  AMEDEE replied 2 years ago.
Hello and welcome! My name is ***** ***** I can assist you with your question. Can I start by getting your VIN?
Customer: replied 2 years ago.
Expert:  AMEDEE replied 2 years ago.
Thank you for the VIN! Does the engine currenlty start and run?
Customer: replied 2 years ago.
no start. Has power. fuel gauge doesn't move. Square around shift indicator goes from park, rev, neut, etc.
Expert:  AMEDEE replied 2 years ago.
Thank you for that information. Turn the key on and check for 5 volts going to the TPS sensor.
Customer: replied 2 years ago.
I will have to get back to you. I have kids to put to bed now.
Expert:  AMEDEE replied 2 years ago.