How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Transmissions
Satisfied Customers: 1736
Experience:  16 yrs. experience with auto, manual, & CVT drivelines
2499435
Type Your Transmissions Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

Porsche Cayenne S: ,I own a porsche Cayenne S 2010 125,000

Customer Question

HI,I own a porsche Cayenne S 2010 125,000 Km teptronic transmission. The problem is intermittent (once in a while). When i start at stop or light, as soon then i arrive around 30 km speed the engine RPM goes up and the car come very slow there no jerking and clung.The transmission doesn't swith at a second gear.
The scan durametric code is 18275. My mechanic change the air bag contact (95565221122) and the electronic unit (95561329201) The problem is not solve.
Now a new code appear 1336. What is the issue about this problem, could you help me.
Best regards
Submitted: 2 years ago.
Category: Transmissions
Expert:  Wolfgang replied 2 years ago.
Hello there I'm Wolfgang here to help. these codes that you have posted .... what modules were the codes stored? especially the 1336 . please use the durametric and scan the trans control module to see if any faults stored . please let me know
Customer: replied 2 years ago.

Hi. Codes 1336 is stored module '' GATEWAY "

In transmission contrôle module no fault stored

Best Regards

Expert:  Wolfgang replied 2 years ago.
at the transmission connectors at the rear of the transmission please check make sure that there are no broken wires. there have been issues where one of the wires break or is hanging on one copper strand. please let me know
Customer: replied 1 year ago.
Relist: I still need help.

Related Transmissions Questions