How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ted Ritter Your Own Question
Ted Ritter
Ted Ritter, Toyota Master Tech
Category: Toyota
Satisfied Customers: 4449
Experience:  Toyota Master Tech, ASE Certified
1279120
Type Your Toyota Question Here...
Ted Ritter is online now
A new question is answered every 9 seconds

I have a 06 Toyota Sienna. Just had rear brakes and tight

Customer Question

I have a 06 Toyota Sienna. Just had rear brakes and tight wheel bearing replaced. Now the ABS light and brake lights are on and the guy who did the brakes can't figure out why lights in dash don't go off?
Submitted: 2 months ago.
Category: Toyota
Expert:  Ted Ritter replied 2 months ago.

Thanks for posting

There is a chance the one of the abs wheel speed sensor wires was stretched during the brake replacement, if the shop has a diagnostic scan tool/code reader that can access the abs system then they can retrieve a diagnostic code showing which sensor wire is broken.

Customer: replied 2 months ago.
When I took it in they said the vode was C0226?
Customer: replied 2 months ago.
Sorry, code.
Expert:  Ted Ritter replied 2 months ago.

DTC C0226 / 21 to C0256 / 24 ABS Solenoid Valve ... - caphector.com

Looks like there is a problem with the abs actuator