How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chad Farhat Your Own Question
Chad Farhat
Chad Farhat, ASE Certified Technician A6 - Electrical / Electronic systems A7 Heating / Air conditioning systems
Category: Toyota
Satisfied Customers: 3967
Experience:  Owner at Carolina Auto Service & Sales , 20 years Experience in Foreign & Domestic vehicles
45790705
Type Your Toyota Question Here...
Chad Farhat is online now
A new question is answered every 9 seconds

Accidentally turned the ignition with foot on brake. Now car

Customer Question

Accidentally turned the ignition with foot on brake. Now car won't crank and security light is flashing
JA: Does the light flash, blink or stay solid? Have you tried to reset the security system?
Customer: Blink
JA: What is the model/year of your Toyota?
Customer: Following the steps but no luck
JA: What year is your Toyota?
Customer: 2013 Toyota Camey
JA: Are you fixing your Camry yourself? What have you tried so far?
Customer: CAMRY
JA: Anything else you want the mechanic to know before I connect you?
Customer: No
Submitted: 2 months ago.
Category: Toyota
Expert:  Chad Farhat replied 2 months ago.

Hi, I'm Chad. Welcome to JustAnswer. I'm reviewing your question and I will be posting your reply ASAP.

Expert:  Chad Farhat replied 2 months ago.

Hey how are you

lets try a Master Reset if you have not already & we go from there

Master reset Procedure

1- Disconnect Battery Cables ( Negative & Positive Cables )you can use any electrical wire as an extension if battery cables don't reach .

2- Hold cables Together for 60 secs ,then let go

3- Wait 30 minutes

4- Make sure all doors are closed

5- Reconnect battery Cables

6- Lock & unlock the vehicles using the key from driver door side (if you have a key fob with no blade key, just lock & unlock using the key fob buttons)

7- Enter the vehicle and attempt to start

Please let me know

Thank You

Chad Farhat

ASE Certified Technician