How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Auto Technician
Category: Toyota
Satisfied Customers: 901
Experience:  16 years of experience
2499435
Type Your Toyota Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

I have three codes numbers 24, 31 and 52. how do i correct

Customer Question

i have three codes numbers 24, 31 and 52. how do i correct the issues?.can i just unplug the knock sensor and leave it unplugged?...also could these codes cause the engine to "hunt" at all rpm?.changed a 93 vze into a 91 harness and chassis...would this make any difference?
JA: Which particular sensor are you asking about? And have any trouble codes been triggered?
Customer: i said the knock sensor and the above codes have been triggered....number 24, 31 and 52.
JA: Are you fixing your 9-3 yourself? What have you tried so far?
Customer: nothing except plugs and wires
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 6 months ago.
Category: Toyota
Expert:  Greg replied 6 months ago.

Hi, I'm Greg (Indy-Tech).
Welcome to JustAnswer. I'm reviewing your question now, and will post back with your reply ASAP.
Rgds Greg.

Expert:  Greg replied 6 months ago.

Hi .

Just seen that no one came forward tol help .maybe due to the fact the question was a bit hard to understand .

Okay you fitted a 1993 3.0 into your 91 model car.

Take it this is a old 4Runner .

Rgds Greg