How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Auto Technician
Category: Toyota
Satisfied Customers: 947
Experience:  16 years of experience
Type Your Toyota Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

1997 toyota landcruiser

Customer Question

1997 toyota landcruiser
Submitted: 8 months ago.
Category: Toyota
Expert:  Toyota Service replied 8 months ago.

Hello. Welcome to Just Answer. Please allow me to assist you. If the vehicle has the FACTORY alarm system installed, the sequence is to get into the vehicle, turn the key form off to on (where the instrument cluster warning lights illuminate), then back off. Repeat this on-off sequence 4 more time.s So, in short (again, if this is the FACTORY system), you cycle the key from OFF to On, then On to Off 4 times (on/off on/off on/off on/off on/ff ). Leave 1 second between each movement of the key. After the 5th cycle, try to start. If this vehicle does not have the factory system, this will not work.