How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask mike switzer Your Own Question
mike switzer
mike switzer,
Category: Toyota
Satisfied Customers: 649
Experience:  lead diagnostic tech at Aamco
Type Your Toyota Question Here...
mike switzer is online now
A new question is answered every 9 seconds

P1135 P0300 code. Just replaced theBank one senser2. Senser

Customer Question

P1135 P0300 code. Just replaced theBank one senser2. Senser was stripped by a mechanic. I am a machinist and I rretapped and anti seized the thread . I had to cut off the crush washer to get enough threads. Im bed permeated blu lock grit to replace the gasket.
JA: Is this your first time dealing with this issue? What size is your engine?
Customer: yes , it is my sons car. 2003 2liter ?, many hands before me
JA: What is the model of your '03 Toyota?
Customer: Rav 4
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: yes . fixed stripped threads and replace o2 senser bank 1 sensor 2. It runs and accelerates good .Slight miss at heated idle.
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 10 months ago.
Category: Toyota
Expert:  mike switzer replied 10 months ago.

do you have access to a scan tool?

Customer: replied 10 months ago.
that is what I used to pull the codes
Expert:  mike switzer replied 10 months ago.

ok what kind of scanner are you using does it have a "generic functions" option

Customer: replied 10 months ago.
150 dollar Sears yes the p0300 code was generic.
Expert:  mike switzer replied 10 months ago.

does you scanner show generic data or only codes?