How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Auto Technician
Category: Toyota
Satisfied Customers: 901
Experience:  16 years of experience
Type Your Toyota Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

2010 Tundra. Help. My ABS and Trac Control light is on, and

Customer Question

2010 Tundra. Help. My ABS and Trac Control light is on, and also my 4lo 4hi light are flashing. When I start my engine, just the ABS and Trac Control are on. I start to drive and the ABS Trac lights turn off. I drive around a 1/4 mile then all the lights on the dash light up as I stated above. If you have any ideas it would be appreciated. Thank
Submitted: 11 months ago.
Category: Toyota
Expert:  Skyvisions replied 11 months ago.

Do you have a code reader to check for codes set in the ABS/Trac ECU?