How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Boxer54 Your Own Question
Boxer54, Toyota Technician
Category: Toyota
Satisfied Customers: 1755
Experience:  ASE Master tech with L1 certification, Toyota Master Diagnostic Technician
Type Your Toyota Question Here...
Boxer54 is online now
A new question is answered every 9 seconds

Code P138 and PO607 2013 Toyota Corrola, Yes tje light came

Customer Question

code P138 and PO607 for a 2013 Toyota Corrola
JA: Have you scanned the code? Have you tried to reset it?
Customer: Yes tje light came on on a trip to Pueblo Colorado, Then it went off and then it came on on thte trip backk to Albuquerque
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: I have not tried to fix because I really do not know where to start.
JA: Anything else you think the mechanic should know?
Customer: I was thinking of cleaning the air intake system, but not sure
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Toyota Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Toyota
Expert:  david craig replied 1 year ago.

Hi Im David, and I will help you as much as possible

Expert:  david craig replied 1 year ago.

we need to fix p0138 first and that should also take care of p0607.

Customer: replied 1 year ago.
po138 po607 codes on 2013 corolla
Customer: replied 1 year ago.
no more
Customer: replied 1 year ago.
2013 Totyota Corolla
Customer: replied 1 year ago.
I am tirede of adding more !
Expert:  Boxer54 replied 1 year ago.

Thank you for trusting us with your questions. Replace the rear O2 sensor and that should take care of both codes. Make sure you clear the codes after the repair.