How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Auto Technician
Category: Toyota
Satisfied Customers: 947
Experience:  16 years of experience
2499435
Type Your Toyota Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

90 Toyota 3.0L 6cyl 7MGE.? wire harness drop dwn to starter,

Customer Question

90 Toyota 3.0L 6cyl 7MGE. ? wire harness drop dwn to starter, trans area...we have 4 plug-ins and only 3 receviers (emty plug is 4 hole. square, gray) Could this be a blank
Submitted: 1 year ago via ChiltonDIY.
Category: Toyota
Expert:  camerontech replied 1 year ago.

hi there,

im cam, a licenced tech.

have a look inside the plug and see if it looks dirty, if it does, it could be a empty connector.

I have included a diagram for you, see if this helps you at all. THere is not alot of info for this year .

Customer: replied 1 year ago.
we just finished a head gasket replacement. putting back the intake and the wire harness seem to be the challenge. lots of vaccum hoses, and tight fits is there anyplace I can look at pictures the chilton web is also incomplete
Expert:  camerontech replied 1 year ago.

yes, they cram this engine in there.

this is the only factory connector location ID diagram that I can find.

what color are the wires on that connector?

Expert:  camerontech replied 1 year ago.

have a look at this attachment too,

on page 9, there is connectors. see if any of these look like yours. there is also a wiring diagram to match wire colors to the part