How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask camerontech Your Own Question
camerontech, Auto Mechanic
Category: Toyota
Satisfied Customers: 480
Experience:  diagnostic auto tech
Type Your Toyota Question Here...
camerontech is online now
A new question is answered every 9 seconds

2006 Corolla is disabled I think because of the alarm. How

Customer Question

2006 Corolla is disabled I think because of the alarm. How do get the car enabled?
Submitted: 1 year ago.
Category: Toyota
Expert:  camerontech replied 1 year ago.

hi there,

Im cam and I hope this is the info you are looking for.

To reset the immobiliser you have to do a ecm registration. To Perform the ECU communication ID registration, at the data link connector jump between the pin 13 the Tc terminal Pink/Black wire to the pin 4 Cg terminal White/Black wire. Turn the ignition switch on and leave it for 30 minutes After 30 minutes, check and see if the engine starts.

I have included a dlc diagram for you.

If the keys need to be programmed it will require a compatable scan tool.

I hope this works, and thanks for any positive ratings!