How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ted Ritter Your Own Question
Ted Ritter
Ted Ritter, Toyota Master Tech
Category: Toyota
Satisfied Customers: 4383
Experience:  Toyota Master Tech, ASE Certified
Type Your Toyota Question Here...
Ted Ritter is online now
A new question is answered every 9 seconds

Last night the VSC message to take car to dealership, along

Customer Question

Last night the VSC message to take car to dealership, along with check engine, tire pressure and one other light. Dealership unable to replicate error. Something to worry about?
Submitted: 1 year ago.
Category: Toyota
Customer: replied 1 year ago.
After the lights cme on, the van ran sluggish and acceleration was very slow. The wheel shook like the alignment was off or something like that.
Expert:  Ted Ritter replied 1 year ago.

Hello, thanks for posting

Did the dealer not connect a diagnostic computer to find out what the codes in the computer are, especially since the check engine light is on, the check engine light is normally the cause for the other lights to turn on so it should be diagnosed for the check engine light first, there has to be some diagnostic information, some code numbers.

Is it something to worry about? I would say yes since you experienced some vehicle stability issues or possibly an engine misfire. The loss of power is because the computer put the engine control system in " limp home mode".

If the dealer did not provide any code information you can visit a local auto parts store like O Reilly or Autozone and they will be able to scan the computer and give you some code information, they do this at no charge in all states except California.