How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Toyota
Satisfied Customers: 22978
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
Type Your Toyota Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

1998 Toyota rav 4 2.0 litres obd meter po 340 camshaft

Customer Question

1998 Toyota rav 4 2.0 litres obd meter po 340 camshaft positioning sensor Acuircuit (bank)or single senser try two new one still getting same reading tks ron
Submitted: 2 years ago.
Category: Toyota
Expert:  sprinkles08 replied 2 years ago.

Hello and welcome to JustAnswer!

You may have a few things going on. It could be a wiring or connection issue, it may still be the sensor, or it may be a cam timing issue. aftermarket cam and crank sensors have shown poor quality and very often cause repeat issues.

Does the engine start and run? If not, does it crank faster than normal or does it sound uneven?

Customer: replied 2 years ago.
it cranks foster
Expert:  sprinkles08 replied 2 years ago.

If the engine cranks faster than it should, doesn't start and is setting a P0340 then the timing belt has almost certainly broken. I would recommend removing the timing cover and inspecting the belt.