How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Auto Technician
Category: Toyota
Satisfied Customers: 901
Experience:  16 years of experience
2499435
Type Your Toyota Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

2008 Seqoia power back door will not operate (after being

Customer Question

2008 Seqoia
power back door will not operate (after being replaced by body shop). owners manual states 'The back door must be initialized'. trying to find how to initialize.
Submitted: 1 year ago.
Category: Toyota
Customer: replied 1 year ago.
we have checked all fuses are good.
Expert:  Genchi Genbutsu replied 1 year ago.

Thank you for allowing me to help you with this concern today and am sorry to hear that this is happening. To initialize the rear door you need to open it by hand all the way up and then close the door by hand all the way down.

One sticking point we see at the Dealer is if any codes are stored that pertain to this rear door. Do any codes show up on the scantool?