How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Auto Technician
Category: Toyota
Satisfied Customers: 901
Experience:  16 years of experience
Type Your Toyota Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

I have take apart my fuse box to my 96 4runner to change

Customer Question

Hello, I have take apart my fuse box to my 96 4runner to change the 100amp alt fuse. I took it too much apart, to include the bottom to get to the bolt to change the fuse... I later found a slim brass or copper clip about 2" long and a 1quarter inch wide... I also replaced the positive battery lead to the starter. I get dash lights and it turns over, but wont start.. like there is a ground missing. wondering if its that piece that came out of the fuse box.
Submitted: 2 years ago.
Category: Toyota
Expert:  Ted Ritter replied 2 years ago.
Hello, I just got a message that you still have not had a response to your question,I'll try to have an answer for you, can you upload a photo of this piece you are referring to?

Related Toyota Questions