How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Toyota Tech -
Category: Toyota
Satisfied Customers: 18958
Experience:  18+yrs experience. State Inspector and Toyota Diagnostics
18617752
Type Your Toyota Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

How do I reset my 2010 camry maint. Req light???

This answer was rated:

How do I reset my 2010 camry maint. Req light???

Welcome to JustAnswer.com! My name is DriveFast71(Ron) and I will do my best to answer all of your questions completely and accurately.


 

Oil Change Reset Procedure

  1. Turn the "ENGINE START STOP" or engine switch OFF with trip meter A reading shown.
  2. While pressing the trip meter reset button, turn the "ENGINE START STOP" switch or engine switch ON.

Without multi-information display

  1. Continue to press and hold the knob until the trip meter displays 000000.

With multi-information display

  1. Continue to press and hold the knob until "COMPLETE" appears on the multi-information display.

Navigation Maintenance Item Setting (If equipped)

When the navigation system is turned on, the "Information" screen displays when it is time to replace a part or certain components.

  1. Push the "SETUP" button.
  2. Touch "Vehicle"
  3. Touch "Maintenance" (a) Maintenance information setting.
  1. Push the "SETUP" button.
  2. Touch "Vehicle" on the "SETUP" screen.
  3. Touch "Maintenance" on the "Vehicle Settings" screen.
  1. Touch the desired button.

"Delete All": To cancel all conditions which have been input.

"Reset All" : To reset the item which has satisfied a condition.

"Reminder": When this button is touched, the indicator is illuminated. The system is set to give maintenance information with the "Information" screen.

When the vehicle needs to be serviced, the touch screen button color will change to orange.

  1. Input the conditions.

Notice of "Date": The next maintenance date can be input.

Notice of "Distance": The driving distance until the next maintenance check can be input.

"Delete": To cancel the date and distance conditions.

"Reset": To reset the date and distance conditions.

  1. Touch "OK" The screen returns to the "Maintenance" screen.
Ron Z. and 3 other Toyota Specialists are ready to help you