How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Toyota Tech -
Category: Toyota
Satisfied Customers: 18856
Experience:  18+yrs experience. State Inspector and Toyota Diagnostics
Type Your Toyota Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

2006 toyota corolla: routing diagram

This answer was rated:

2006 toyota corolla wirth airserpantine belt relacing, with routing diagram

Welcome to! My name is DriveFast71(Ron) and I will do my best to answer all of your questions completely and accurately.


To make this job easier, there is a special tool - Serpintine Belt Tensioner Tool - that you can usually rent from any local "big chain" part store.


  • Turn the drive belt tensioner clockwise to relieve tension on the belt, and then remove the belt.

  • Carefully return the tensioner to the unloaded position.


  • Be sure to connect SST and the tools so that they are inline when using.
  • When retracting the tensioner, turn it clockwise slowly in 3 sec. or more. Be sure to not apply force rapidly.
  • After the tensioner is retracted all the way, do not apply force any more than necessary.
Ron Z. and other Toyota Specialists are ready to help you

Related Toyota Questions