Jaguar repair problems? Ask a Jaguar repairs Expert.

Ask an Expert, Get an Answer ASAP!

Jaguar Head Gasket related Questions

A head gasket is usually situated between the cylinder block and the place above the cylinders on top of the cylinder block in an internal combustion engine. The main purpose of this gasket is to seal the cylinders not only to provide high compression but also to avoid any coolant or engine oil to leak into the cylinders. A Jaguar head gasket refers to a gasket that is used in Jaguar cars. Below are frequently asked questions on issues relating to Jaguar head gasket that have been answered by the Experts.

What could cause a engine in a Jaguar to not start after having the head gasket?

In some cases, a loss of compression in the cylinders could cause the issue described. If this is the case, verify fire to all cylinders. In addition, the fault may be with the cam timing.

If a Jaguar has overheated, blown a radiator hose and blown a head gasket what can be done?

Most generally all that can be done is to replace, repair or overhaul the engine. However, replacing the water pump, the idle pulleys and the belt tensioner are precautionary measures to avoid further overheating. Additionally, it would be a good idea to use synthetic oil in the engine and service the vehicle according to its factory user manual.

What can someone do if there is water on the spark plugs from a Jaguar head gasket?

A person would need to remove the head gasket; weld up the head in order to remove any corrosion finally, replace the head gasket.

What could be the reason for a car to misfire when it gets hot even though the Jaguar head gasket has been replaced?

There could be a few reasons that cause a problem like this to occur. The most probable one could be a bad coil. However, timing, fuel, restricted exhaust, or a failed engine may likely lead to such problems as well. Thus, in a case like this, inspecting the spark plugs, the ignition coil connections and the engine condition for any damages would be required.

What steps would a person need to follow in order to check a faulty Jaguar head gasket?

First verify if there is a blockage in the exhaust. Once this is done, the person would be required to inspect the cooling system for any exhaust gases. One may need to have an exhaust back pressure tester to do this type of inspection. A person would then verify the fuel pressure is normal and that there is no restriction in the fuel flow by the filter.

If you have Jaguar head gasket issues and are not skilled at making the repair on your own, contact an Expert for professional guidance. This could help in resolving the problem in the best possible manner. If you need clarification about your specific situation with respect to issues related to Jaguar head gasket, you may ask a Jaguar Mechanic Expert to evaluate your case details and provide a mechanical insight.
Please type your question in the field below

3 verified Jaguar Mechanics are online now

Jaguar Mechanics on JustAnswer are verified through an extensive 8-step process including screening of licenses, certifications, education and/or employment. Learn more



Bachelor's Degree

478 positive reviews

European Car Expert

Associate Degree

225 positive reviews
Juan Crespo

ASE Certified Technician

Bachelor's Degree

150 positive reviews
See all Jaguar Mechanics