Ford Engine Problems
Below are frequently asked questions on issues relating to Ford engine problems that have been answered by the Experts.
What might be the Ford engine problem if a check engine light appears when accelerating?The problem could be a failed ignition coil. If this is the case, the best course of action would be to extract the faulty codes to know the exact issue.
What may cause a Ford engine to start rough?A low fuel pressure, an incorrect air or fuel mixture, vacuum leaks or stuck open EGR valves may cause this issue to happen. Thus, troubleshooting the problem for a proper diagnosis is highly recommended.
What could cause a Ford engine to lose compression after running a few miles?This could probably be caused by a blown head gasket. In other situations, an incorrect timing could also cause this problem to happen. The best way to determine the true fault is by carrying out a compression test.
What could cause a Ford engine to idle high or accelerate when a car is in parked position?In many cases like this, a bad throttle sensor, a malfunctioned idle control valve or a vacuum leak could cause this to happen. To fix the problem, a person would be better off troubleshooting the components by performing a scan test.
What could be the possible reason for a Ford engine to misfire while going uphill?Many times, the reason this could happen is that the car might have a defective spark plug or a failed ignition coil. Thus, troubleshooting these parts to determine the true fault would be required. Alternately, performing a compression test may also help in fixing the issue.
What could cause a P1131 Ford engine code to appear?Most likely, it could be a bad oxygen sensor that may cause the problem to occur. To verify the exact cause of the problem, inspecting the sensor for dirt, leakage or blockage would be required. Additionally, checking the vacuum lines for any faults would be a good idea.
Why is a Ford engine revving up automatically?This may happen if the IAC valve inside the vehicle has gone bad. In other situations, there may be a vacuum leak causing this issue to arise. To cure this problem, the best possible recourse would be to inspect the intake system for any leaks using a carburetor cleaner. Additionally, removing and cleaning the valve with a throttle body cleaner would be a better idea.
Car owners are always better off seeking Expert help when faced with any Ford engine problems. They would help to provide the best possible answer to their question in terms of both curing the problem and resolving matters such as finding the exact location for engine identification numbers. If you need clarification about your specific situation with respect to issues related to Ford engine problems, you may ask a Ford Mechanic Expert to evaluate your case details and provide a mechanical insight.