Ford Camshaft Questions
Below are frequently asked questions on issues relating to Ford camshaft that have been answered by the Experts.
What could be the possible reason for a Ford camshaft to display a P0012 code?There could be a few possible reasons for a code like this to appear. The most probable one could be faulty or incorrectly adjusted camshaft timing. Alternately, defective camshaft advance mechanics binding, stuck open VCT valve or continuous oil flow to piston chamber could be some possibilities that lead to this problem.
Could a bad Ford camshaft sensor cause the transmission on a car to slip?It is unlikely that a faulty camshaft sensor would cause a transmission on a car to slip as it is totally different than a transmission issue. A camshaft sensor is responsible for regulation of the injector timing and when it goes bad, a vehicle may experience a slight roughness and a small deterioration in the engine performance.
What can someone do to replace a Ford camshaft sensor on a vehicle?The first step would be to take out the air cleaner by draining the cooling system. Once this is done, the person would need to detach the heater water outlet tube and then switch off the connection to the sensor electrical connector. Finally, the person should be able to remove the camshaft sensor for the replacement.
What could be the issue if a car stutters and loses power while idling wherein the fault may seem to be with the Ford camshaft?A car may have a several possibilities that can cause this issue to happen. Those could be a faulty exhaust camshaft gear, defective flex plate, damaged flywheel, misaligned timing belt or a bad variable cam timing solenoid. The best possible recourse would be to contact an Expert to find out the true cause of the problem.
What could cause a car engine with replaced Ford camshaft sensor to fail to idle below a certain speed limit after it gets warmed up?In some cases, the problem could be a defective camshaft phaser that may have got stuck, failing to advance. Thus, in this kind of a scenario, the best course of action would be to replace the phaser. Additionally, it would be a good idea to have the timing chain and the front engine cover replaced along with the phaser. Many auto stores sell the replacement.
What could cause a Ford camshaft position sensor to malfunction? What should be done to fix it?A faulty camshaft position sensor could likely cause the issue described. However, the problem could also occur due to defective spark plugs, leaked plug wires, failed alternator diode or any add on device interference. Verifying these components for any faults would be highly recommended. In the case they all turn out to be fine, replacing the sensor is what a person would need to do.
It is always the best idea to consult an Expert prior to doing any Ford camshaft repair or replacement, if the person does not have the required knowledge to do so. Many times, a car owner may want to have a camshaft sensor on their vehicle replaced. However, he or she may not know the proper synchronizing procedure.
If this is the case, contacting an Expert would be the best possible solution. If you need clarification about your specific situation with respect to issues related to Ford camshaft, you may ask a Ford Mechanic Expert to evaluate your case details and provide a mechanical insight.