Subaru

Have Subaru questions? Ask a Subaru mechanic and get answers ASAP

Connect one-on-one with {0} who will answer your question

Related Subaru Questions
We are trying to change a timing belt and we have a pink dot
we are trying to change a timing belt and we have a pink dot and a whit dot on the cam gear and are not sure how to align it correctly?? … read more
AutoDoc1
AutoDoc1
High School Diploma
1,423 satisfied customers
Replacing timing belt on a 1999 subaru outback legacy, 2.2l
Replacing timing belt on a 1999 subaru outback legacy, 2.2l engine. I need timing marks, and I need to replace oil seals behind cam gears, and any suggestions on how best to do so. I am also changing … read more
tamaz
tamaz
1,806 satisfied customers
Bad noise this morning on start up. Had to take kid to
Bad noise this morning on start up. Had to take kid to school, off and on, mostly on. I guess worse and better but still there the whole way. Thinking it's a bearing?… read more
Randy
Randy
619 satisfied customers
Subaru Legacy L: 1998 Subaru Legacy L 2.2L Engine. We have
1998 Subaru Legacy L 2.2L Engine. We have lined the timing belt up by the marks on the crankshaft pulley and the camshaft pulleys and we are not getting compression. Our books as well as Mitchell On D… read more
Mike V.
Mike V.
technician
Subaru and Nissan factory training.
29,630 satisfied customers
legacy: I have a 1995 Subaru Legacy when I got the car I didnt
I have a 1995 Subaru Legacy when I got the car I didnt start at all I replaced the fuel pump and filter it started right up for a few seconds that is. I tried again, it started, idled, died.... I just… read more
EricFromCT
EricFromCT
Auto Technician
5,151 satisfied customers
Subaru Legacy L: What timing marks do you go by on a 1997 Subaru
What timing marks do you go by on a 1997 Subaru Legacy L 2.2 SOHC. I lined up the marks on the cams with the marks on the belt cover. Then I put the mark on the relucter ring on crank. in line with th… read more
tamaz
tamaz
1,806 satisfied customers
Subaru: I just changed the front cam seals and oil pump seal
I just changed the front cam seals and oil pump seal with Subaru parts. I also did the timing belt and made sure everything was lined up. It ran rough and a cam shaft sensor code showed up. I changed … read more
Mike V.
Mike V.
technician
Subaru and Nissan factory training.
29,630 satisfied customers
Subaru legacy 2.5L dohc outback: After putting in the water
After putting in the water pump in a 99 subaru legacy outback 2.5L dohc and put it back together. We have tried to time to car and it still does not run. I just had the heads and values done. We seem … read more
tamaz
tamaz
1,806 satisfied customers
my 1998 subaru legacy outback isnt firing. I changed the cam
my 1998 subaru legacy outback isnt firing. I changed the cam position sensor, crank position sensor & ignition module. both timing belts are intact & in good condition. the only other thing logically … read more
Mike V.
Mike V.
technician
Subaru and Nissan factory training.
29,630 satisfied customers
subaru forester: align..oil pump..passenger side camshaft sprockets
the camshafts and the crankshaft marks don't line up on my 98' subaru forester. so i did what it said and align the mark on the crankshaft sprocket with the oil pump mark. i was able to turn the passe… read more
Mike V.
Mike V.
technician
Subaru and Nissan factory training.
29,630 satisfied customers
1997 impreza: timing belt is needed..2.2 engine..overhead cam
what type of timing belt is needed for 1997 impreza 2.2 engine, and does it have a dual overhead cam engine… read more
Mike V.
Mike V.
technician
Subaru and Nissan factory training.
29,630 satisfied customers
2006 subaru legacy: garage..158,000 miles and new tires
I brought my car to a respected garage and found out I need a transmission and one wheel baring on my 2006 subaru legacy wagon with 158,000 miles and new tires. Is it worth it?… read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
19,771 satisfied customers
How to change a camshaft pulley on a 1999 Subaru Legacy Has
How to change a camshaft pulley on a 1999 Subaru Legacy? Has New timing belt but has a cracked camshaft pulley? And How to retime it after it is installed?… read more
Mike V.
Mike V.
technician
Subaru and Nissan factory training.
29,630 satisfied customers
Subaru Baja: rod..p0011 A..cam..Intake manifold..acceleration
05 Subaru Baja 50,590 miles Regular cuatomer older guy, not a hot rod. Calls yesterday with check engine lite complaint and we ahd him stop in for a scan. P0011 A-cam timingover advance or system perf… read more
Tim Mohr
Tim Mohr
ASE MASTER TECH
Master's Degree
431 satisfied customers
99 legacy outback: ve changed..head gaskets..wont start....any ideas
we've changed the head gaskets in my 99 legacy outback...now we are having trouble with getting the timing belts to line up and starting the engine....once we think we have the belt lined up pefectly,… read more
Mike V.
Mike V.
technician
Subaru and Nissan factory training.
29,630 satisfied customers
1996 Subaru Legacy: 2.5L..bearings..timing belt..the passenger side
Had a 1996 Subaru Legacy 2.5L dual overhead cam come in dead because the bearings in one of the timing belt pulleys froze up. When that happened the cam the upper and lower cam pulleys on the passenge… read more
Mike V.
Mike V.
technician
Subaru and Nissan factory training.
29,630 satisfied customers
1996 subaru legacy. OBD 2 says cam position sensor malfuction(code
1996 subaru legacy. OBD 2 says 'cam position sensor malfuction(code 305(?)'. Engine will not start. sounds like its knocking when turning the ignition on (also says 'knock sensor malfunction'. This is… read more
Mike V.
Mike V.
technician
Subaru and Nissan factory training.
29,630 satisfied customers
99 subaru impreza: pistons 1 and 2 when attaching the timing belt
what position do you want pistons 1 and 2 when attaching the timing belt on a 99 subaru impreza 2.2… read more
Pietros
Pietros
Advanced Motor Craft, Franchise tra
68 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Kevin C.

Kevin C.

Subaru Master Tech.

1,727 satisfied customers

34 years of Subaru service experience, ASE Master Technician.

George H.

George H.

Subaru Certified Technician

1,377 satisfied customers

ASE Master Tech 15 + Years

Tim Mohr

Tim Mohr

ASE MASTER TECH

431 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Chris(aka-Moose)

Chris(aka-Moose)

Subaru Technician

416 satisfied customers

16 years of experience

Matt

Matt

Engineer

401 satisfied customers

Mechanical Engineer with 20 years experience in the auto industry, 8 yrs in formula 1 engine testing

Don - Mo Lurch

Don - Mo Lurch

Subaru Mechanic

206 satisfied customers

Heavy Line Mech, Race Shop Owner, Mobile Electronics.

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

161 satisfied customers

ASE Master Tech 20+ Years

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x