How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris(aka-Moose) Your Own Question
Chris(aka-Moose), Subaru Technician
Category: Subaru
Satisfied Customers: 47618
Experience:  16 years of experience
Type Your Subaru Question Here...
Chris(aka-Moose) is online now
A new question is answered every 9 seconds

Hahaha lots, 2001 rs2.5 was an auto put a 5mt out of a 1998

Customer Question

hahaha lots
JA: What is the model/year of your Subaru?
Customer: 2001 rs2.5 was an auto put a 5mt out of a 1998 outback sport in it
JA: Are you fixing your Outback Sport yourself? What have you tried so far?
Customer: the outback sport was a donor car the rs 2.5 is what i'm working ojn trying to figure out how to adapt the MT to the AT ECU speed sensors and kill a couple of other codes it's tossing up
JA: Does the sensor have a wire-wrapped magnet? If so, have you checked it with an ohmmeter?
Customer: i'll have to go look
JA: OK. To minimize me, please click the down arrow at the top right corner of this box.
Customer: i have 2 red/wite wires and 2 black wires trying to figure out what those are, is that speed sensor, or some other trans sensor
JA: Anything else you want the mechanic to know before I connect you?
Customer: nah we're going to have to talk through a bit thank you pearle
Submitted: 7 months ago.
Category: Subaru
Expert:  Chris(aka-Moose) replied 7 months ago.

Welcome, I'm Chris (aka Moose), my normal schedule online is around lunch and after dinner till early morning.

  • I am sorry no one has helped yet in return for the question fees you have already paid.
  • I believe I can help with this question.
  • Reply and let me know when your able to work on this concern.
  • Have you thought about just using a wire harness and computer for the MT
Expert:  Chris(aka-Moose) replied 7 months ago.

Hello again Chris here,

  1. I have to assume you were not pleased with my help, because you have not replied or rated the post.
  2. What would you like to do regarding your question now?
  3. Do you still need help? Please reply I want you to get equal to or more than what you paid for.
  4. This post is coming up on the 7 day mark where it times out. That can prevent me from being able to post answers to your replies.

Thanks Chris