How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask tamaz Your Own Question
tamaz, Subaru master technician
Category: Subaru
Satisfied Customers: 1262
Experience:  Subaru certified,ASE Master technician,25 years experience
Type Your Subaru Question Here...
tamaz is online now
A new question is answered every 9 seconds

I have a 1996 Subaru outback legacy. I replaced the head

Customer Question

I have a 1996 Subaru outback legacy. I replaced the head gaskets and now I can not get it started. I feel it is something obvious but can't figure it out. Have gas, injector voltage does not seem to exist. Backtracked the wiring but can not find the ignition relay? any suggestions?
Submitted: 1 year ago.
Category: Subaru
Expert:  tamaz replied 1 year ago.

Hi,please check the harness connectors between the engine and transmission for loose pins etc.. This area of the harness carries all grounds for ecm ,it's always been a area of concern especially after engine work,thanks