How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kevin C. Your Own Question
Kevin C.
Kevin C., Subaru Master Tech.
Category: Subaru
Satisfied Customers: 1727
Experience:  34 years of Subaru service experience, ASE Master Technician.
Type Your Subaru Question Here...
Kevin C. is online now
A new question is answered every 9 seconds

Mike, I had ordered the part from I removed

Customer Question

Mike, I had ordered the part from I removed the sensor (the upstream one per previous discussion - which I also identified as correct because the new part matched the plug correctly). The actual Denso 02 Sensor I took out and the Bosch replacement
look very different. Want to make sure I have the correct part. Thanks!
Submitted: 2 years ago.
Category: Subaru
Customer: replied 2 years ago.
See this picture ...
Expert:  Mike V. replied 2 years ago.
Got the photo and sorry for the delay. It looks like it's just different because one is Bosh and the other Denso, if the wiring plugs in then you are fine and have the right one. It will work even though it looks different!
Customer: replied 2 years ago.
Perfect! Thank you sir! Installed successfully and cancelled out the check engine light. I am sure I will be back for more needs in the future. Best Regards, David
Expert:  Mike V. replied 2 years ago.
Great news David and you are more then welcome!
Customer: replied 2 years ago.
Thanks again Mike!
Expert:  Mike V. replied 2 years ago.
Glad I could help.