How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kevin C. Your Own Question
Kevin C.
Kevin C., Subaru Master Tech.
Category: Subaru
Satisfied Customers: 1727
Experience:  34 years of Subaru service experience, ASE Master Technician.
Type Your Subaru Question Here...
Kevin C. is online now
A new question is answered every 9 seconds

How do I get to turbo, banjo bolt and screen on 2005 Outba

Customer Question

How do I get to turbo, banjo bolt and screen on 2005 Outback?
Submitted: 2 years ago.
Category: Subaru
Expert:  tamaz replied 2 years ago.
Hi ,the bolt your speaking of is located on the back of the cylinder head,the way i get to it is to remove the upper heatshield surrounding the turbo,then I remove the bracket that goes from the turbo to the cylinder head(about 2-3 inches and also upper heat shield is attached to it)then a 17 mm wrench to remove still a bit tight, a little patience is all you'll need,thanks for your time
Customer: replied 2 years ago.
Thanks, ***** ***** what I needed to know.
Expert:  tamaz replied 2 years ago.
Your welcome,good luck