How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask walkereng Your Own Question
walkereng
walkereng, Consultant
Category: Structural Engineering
Satisfied Customers: 2599
Experience:  Over 30 years of Structural Engineering experience.
61772417
Type Your Structural Engineering Question Here...
walkereng is online now
A new question is answered every 9 seconds

I'm building a 12'x18' bldg; 2x6 floor joists on 16" centers

Customer Question

I'm building a 12'x18' bldg; 2x6 floor joists on 16" centers with cross beam
JA: OK. Tell me a bit more about what's going on so we can help you best.
Customer: beam at 6' so max weight bearing on 2x6 is six foot, need to know live load of floor an roof; psf; req'd by county for approval of plans
JA: Is there anything else important you think the Structural Engineer should know?
Customer: need to know wind strength, snow an seismic; and snow load
Submitted: 3 months ago.
Category: Structural Engineering
Expert:  StructuralEng replied 3 months ago.
Hello
Expert:  StructuralEng replied 3 months ago.
Do you mean the required wind speed or loading? It's not clear. Same with snow and seismic. What exactly do you need?
Customer: replied 3 months ago.
I'm submitting Bldg plans to county for approval of 12'x18' shed to put washer/dryer.
They need to know structural data on bllg;
I think It's all standard info from mechanical eng handbook. Load bearing strength of floor built using 2x6 on 16" Ctr spans if 6'
If you could see form an plans you'd understand
I was hesitant to submit due to communication
Expert:  StructuralEng replied 3 months ago.

You can attach them here.

Expert:  StructuralEng replied 2 months ago.

Do you still need help with this?