How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask walkereng Your Own Question
walkereng, Consultant
Category: Structural Engineering
Satisfied Customers: 2513
Experience:  Over 30 years of Structural Engineering experience.
Type Your Structural Engineering Question Here...
walkereng is online now
A new question is answered every 9 seconds

Below is the link to my previous question. I am curious if i

Customer Question

Below is the link to my previous question.I am curious if i need to pour a footing for this beam or if the current 4" thick SOG is acceptable. One side sits on the perimeter footing. I am assuming the slab is 2500PSI
Submitted: 3 months ago.
Category: Structural Engineering
Expert:  StructuralEng replied 3 months ago.

2'-0" square x 1'-0" thick.

Related Structural Engineering Questions