How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask walkereng Your Own Question
walkereng
walkereng, Consultant
Category: Structural Engineering
Satisfied Customers: 2599
Experience:  Over 30 years of Structural Engineering experience.
61772417
Type Your Structural Engineering Question Here...
walkereng is online now
A new question is answered every 9 seconds

Is it possible to make a beam 36' lax 12"x4" out of

Customer Question

Is it possible to make a beam 36' lax 12"x4" out of composite material not subject to dry rot
JA: OK. Tell me a bit more about what's going on so we can help you best.
Customer: The beams are for an exterior trellis carrying 25 4" 6" x15'L and canopy of plant material
JA: Is there anything else important you think the structural engineer should know?
Customer: no sag or dry rot
Submitted: 11 months ago.
Category: Structural Engineering
Expert:  walkereng replied 11 months ago.

I can help

Expert:  walkereng replied 11 months ago.

Some of your words in the description looked like they got changed by your auto correct

Expert:  walkereng replied 11 months ago.

So you will have two 36' long beams about 15' apart with 4x6's spanning between them

Expert:  walkereng replied 11 months ago.

Let me know when you come back online

Expert:  walkereng replied 10 months ago.

I am still here to help if you need it