How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask StructuralEng Your Own Question
StructuralEng
StructuralEng, Consultant
Category: Structural Engineering
Satisfied Customers: 7315
Experience:  Structural Engineer
59685895
Type Your Structural Engineering Question Here...
StructuralEng is online now
A new question is answered every 9 seconds

I'm looking to size a beam to put in place of a load bearing

Customer Question

I'm looking to size a beam to put in place of a load bearing wall
JA: OK. Tell me a bit more about what's going on so we can help you best.
Customer: its an 11ft span, beam will hold up 2x6 upper floor joist 16 oc
JA: Anything else I can tell the Structural Engineer before I connect you two?
Customer: no
JA: I'm sending you to a secure page on JustAnswer so you can place the $5 fully refundable deposit now. While you're filling out that form, I'll tell the Structural Engineer about your situation and connect you two.
Submitted: 1 year ago.
Category: Structural Engineering
Expert:  StructuralEng replied 1 year ago.
Hello. I can help
Expert:  StructuralEng replied 1 year ago.
What is the joist length on each side of the beam? Will it support a floor, attic, or both?
Expert:  StructuralEng replied 1 year ago.
Do you still need help with this.