How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask StructuralEng Your Own Question
StructuralEng, Consultant
Category: Structural Engineering
Satisfied Customers: 7135
Experience:  Structural Engineer
Type Your Structural Engineering Question Here...
StructuralEng is online now
A new question is answered every 9 seconds

I need a size head beam laminated 3.3m wide, 40 kg load The

Customer Question

I need a size for door head beam laminated 3.3m wide , 40 kg load
The next wall is 2.4 m into the room
I want to install another beam there. this width is 4.2m
Then the next wall is 5 m in further which is remaining
Submitted: 1 year ago.
Category: Structural Engineering
Expert:  StructuralEng replied 1 year ago.


Expert:  StructuralEng replied 1 year ago.

Is it supporting a floor, attic, and roof?

Customer: replied 1 year ago.
skillion metal roof with gyprock ceiling
Customer: replied 1 year ago.
If you need money up front so I can get my answer please let me know
24 hours has gone by
I assume you have taken out the $5
Expert:  StructuralEng replied 1 year ago.

I apologize for the delay. I will size the beam now.

Expert:  StructuralEng replied 1 year ago.

3.5" X 11.25" 2.0E LVL

Customer: replied 1 year ago.
Thank you for that
I asked for the size of 2 beams
You did not give me the one for the window head
You people keep asking for feed back and sign up for things $$$$ but you need to do it correctly the first time to keep me attracted to your bussiness
I gave you the load bearing of 40 kg but you came back to me about an attic above
I would have thought that figure would tell you what was happening
Expert:  StructuralEng replied 1 year ago.

I'm sorry you feel frustrated. I will opt out of this question for you. Each question is supposed to be asked individually. Each beam size should be a different question.

Related Structural Engineering Questions