How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask walkereng Your Own Question
walkereng
walkereng, Consultant
Category: Structural Engineering
Satisfied Customers: 2516
Experience:  Over 30 years of Structural Engineering experience.
61772417
Type Your Structural Engineering Question Here...
walkereng is online now
A new question is answered every 9 seconds

1)I need to size an Arch Grade Glu-Lam with a total span of

Customer Question

1)I need to size an Arch Grade Glu-Lam with a total span of 15.5' and a point load (from ridge beam) of 22,950 lbs is located 4' from one end of the span. No other loads impact. This is also the endpoint of the ridge beam. 2)I am also revising a beam (from
yesterday) which can be a versa lam ,12.5'span with midspan point load of 19,507lbs. No other loads. Thanks Dean Brookie AIA
Submitted: 1 year ago.
Category: Structural Engineering
Expert:  StructuralEng replied 1 year ago.

Hello

Related Structural Engineering Questions