Structural Engineering

Ask Structural Engineering Questions and Get Expert Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Structural Engineering Questions
I am extending a 5” aluminum I beam over a bluff. The beam
I am extending a 5” aluminum I beam over a bluff. The beam is 25' long and is made of 6061 T-6 American standard. The beam is weighted down at the end away from the bluff by approximately 1500lb of co… read more
PaulP324
PaulP324
consulting engineer
MS
1,276 satisfied customers
Will a 20' aluminum c-beam, grade 6061, 6" x 2" x 1/4",
Will a 20' long aluminum c-beam, grade 6061, 6" x 2" x 1/4", braced laterally every 2 feet, support 800 lbs. at mid span? … read more
StructuralEng
StructuralEng
Consultant
Bachelor's Degree
8,463 satisfied customers
I am planning a deck project with the goal of handling an
I am planning a deck project with the goal of handling an estimated gross weight of 5,000 lbs. The deck area is 25ft by 12ft. I am planning on building the supporting structure out of aluminum. I have… read more
StructuralEng
StructuralEng
Consultant
Bachelor's Degree
8,463 satisfied customers
I need to replace a rafter tie that was removed from the
I need to replace a rafter tie that was removed from the roof joists of an old railroad station when it was converted into apartments in the 1950's. The roof was once covered in clay tiles (1000# ****… read more
StructuralEng
StructuralEng
Consultant
Bachelor's Degree
8,463 satisfied customers
I have a c channel pair of ramps measuring 6'8" that came
I have a c channel pair of ramps measuring 6'8" long that came with a trailer I bought. They are rated for 5000 lbs. I need 6000 to be able to load my skidloader. The c dimensions are 3.1 x 1.4 with .… read more
StructuralEng
StructuralEng
Consultant
Bachelor's Degree
8,463 satisfied customers
It'll take me a little bit of time to get the details
Hi there. It'll take me a little bit of time to get the details together for the other question. However, the 7" C channel. I need to install 12 new sections. I can use aluminum or steel. Obviously st… read more
walkereng
walkereng
Consultant
Bachelor's Degree
5,327 satisfied customers
I have an(6061-T6 Aluminum I Beam - AS) that's 3"H X 2.33 wide
I have an(6061-T6 Aluminum I Beam - AS) that's 3"H X 2.33 wide flange X.170 Web X 8'LONG. Will be using for gantry and wanted to know load capacity? Thanks… read more
StructuralEng
StructuralEng
Consultant
Bachelor's Degree
8,463 satisfied customers
I want to build a platform out of aluminum. Size 4 ft by 8
I want to build a platform out of aluminum. Size 4 ft by 8 ft. I'm picturing a 4 ft by 8 ft frame with cross members on 2 ft centers. Max load on the platform would be 600 pounds. I'd have an expanded… read more
StructuralEng
StructuralEng
Consultant
Bachelor's Degree
8,463 satisfied customers
We have two "parrell" w12 x 40 x 25 ft (6061 aluminum) be
We have two "parrell" w12 x 40 x 25 ft (6061 aluminum) beams that are on 8 ft. centers and tied together with five evenly spaced 4 inch heavy pipes bolted to the center web of each w12 to form a skid.… read more
StructuralEng
StructuralEng
Consultant
Bachelor's Degree
8,463 satisfied customers
I build truck scales. Basically a bridge that weighs. I am
I build truck scales. Basically a bridge that weighs. I am using a W12x35 beam on each side of the scale. 9' between webs. I am using seven W4x13 beams in between. On in the center and 3 on the inside… read more
StructuralEng
StructuralEng
Consultant
Bachelor's Degree
8,463 satisfied customers
I need to build a walking platform using (2) four inch aluminum
I need to build a walking platform using (2) four inch aluminum channels as a truss with aluminum grating between the two channels, with upright supports every 8' apart. Is the materials I'm using sub… read more
StructuralEng
StructuralEng
Consultant
Bachelor's Degree
8,463 satisfied customers
I want to build a horizontal platform from 6061 grade 1/4"
I want to build a horizontal platform from 6061 grade 1/4" aluminum plate and I beams. The platform will be 19' wide by 12' deep. One end of the platform will supported by a sturdy wall comprised of 6… read more
StructuralEng
StructuralEng
Consultant
Bachelor's Degree
8,463 satisfied customers
Aluminum I-Beam: w=3.5" H=5" Web thickness =.19"Momen
Aluminum I-Beam: w=3.5" H=5" Web thickness =.19" Moment of Inertia: lx=13.9 ly=2.29 Section Modulus: Wx=5.58 Wy=1.31 Supported at each end, with uniform load of 3.24 lbs/in, what is the maximum deflec… read more
StructuralEng
StructuralEng
Consultant
Bachelor's Degree
8,463 satisfied customers
want to attach a electric wench to an aluminum I beam H=10"
want to attach a electric wench to an aluminum I beam H=10" W=6" total lenght is 10'. The beam would be drilled in 4 places to bolt the wench to it. The beam will be used to wench duct work weighing a… read more
StructuralEng
StructuralEng
Consultant
Bachelor's Degree
8,463 satisfied customers
I am building a "railway" from a bluff to a boat dock. I have
I am building a "railway" from a bluff to a boat dock. I have 4"x1.73" x .235" 6061 channel to use as materialfor the two rails. The 60" long platform will ride on 4 load points [wheels] within the ch… read more
StructuralEng
StructuralEng
Consultant
Bachelor's Degree
8,463 satisfied customers
building a loading ramp with a smooth surface 27 inches wide
building a loading ramp with a smooth surface 27 inches wide by 8 feet long using 1-1/2 plywood on the weak length. plan on adding aluminum angle wrapped around each long edge with the excess extendin… read more
StructuralEng
StructuralEng
Consultant
Bachelor's Degree
8,463 satisfied customers
I need to stiffen a 21 long wall that is typical wood construction,
I need to stiffen a 21' long wall that is typical wood construction, with doubled-2X6 vertical studs (pine) on 16" centers, varying in length from 7 1/2' to 16', as the wall is taller on one end than … read more
StructuralEng
StructuralEng
Consultant
Bachelor's Degree
8,463 satisfied customers
Sculptor needs 12 Aluminum I beam and rolling carrier for
Sculptor needs 12' Aluminum I beam and rolling carrier for my 2nd story removable winch to occasionally raise and lower 200 lb or less sculpture to ground. Two thirds will be well supported one third … read more
StructuralEng
StructuralEng
Consultant
Bachelor's Degree
8,463 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

vgdlpc

vgdlpc

Master's Degree

17 satisfied customers

Civil Engineer, Major in Structures and Foundations. Professional Engineer 11 years of experience.

StructuralEng

StructuralEng

Consultant

8,463 satisfied customers

Structural Engineer

walkereng

walkereng

Consultant

5,327 satisfied customers

Over 35 years of Structural Engineering experience.

Shannon Galway

Shannon Galway

-

208 satisfied customers

VP Technical Services at Major Engineering Company

JAYCEG

JAYCEG

99 satisfied customers

Expert

PaulH471

PaulH471

Construction Manager

46 satisfied customers

Expert

William Purpura

William Purpura

Managing General Partner

29 satisfied customers

Managing General Partner at Dargon Developement

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x