How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JON Your Own Question
JON
JON, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1390
Experience:  Certified Small Engine Technician
94737911
Type Your Small Engine Question Here...
JON is online now
A new question is answered every 9 seconds

Would you know the head bolt torque specs for a yanmar 3t95j

This answer was rated:

Would you know the head bolt torque specs for a yanmar 3t95j motor,also the intake and exhaust valve clearance
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: A couple weeks.
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: Not that i know of.
Cylinder Head Bolts (First Step Lubricating Oil Applied) 26 - 30 Nm (19 - 22 lb-ft)
Cylinder Head Bolts (Second Step) 53.9 - 57.9 Nm (39.7 - 42.7 lb-ft)
Connecting Rod Bolts (Lubricating Oil Applied) 22.6 - 27.5 Nm (16.6 - 20.2 lb-ft)
Flywheel Mounting Bolts (Lubricating Oil Applied) 80.4 - 86.4 Nm (59.3 - 63.7 lb-ft)
Main Bearing Bolts (Lubricating Oil Applied) 75.5 - 81.5 Nm (55.6 - 60 lb-ft)
Crankshaft Pulley Cap Screw (Lubricating Oil Applied) 113 - 123 Nm (83 - 90 lb-ft)
Glow Plugs 15 - 20 Nm (11 - 15 lb-ft)
Governor Weight Support Nut 69 - 74 Nm (51 - 55 lb-ft)
Fuel Injector Nozzle Case Nut 29 - 49 Nm (21 - 36 lb-ft)
Fuel Injector Line Nuts 29.4 - 34.4 Nm (22 - 25 lb-ft)
Fuel Injector 49 - 59 Nm (36 - 43 lb-ft)
Fuel Injector Return Line Nuts 24 - 33 Nm (18 - 24 lb-ft)
Injector Pump-to-Timing Cover Cap Screw 22.5 - 28.4 Nm (17 - 21 lb-ft)
Valve Cover 11 Nm (97 lb-in.)
Rocker Arm Shaft Support Cap Screws 22.5 - 28.4 Nm (17 - 21 lb-ft)
Timing Cover Mounting Cap Screw 9 Nm (80 lb-in.)
Exhaust Manifold Mounting Cap Screw and Nut 25 Nm (221 lb-in.)
Oil Pan and Spacer to Engine Block Cap Screw 22.5 - 28.4 Nm (17 - 21 lb-ft)
Oil Pan and Spacer to Timing Gear Housing Cap Screw 18 - 23 Nm (13 -17 lb-ft)
Engine Back Plate Mounting Cap Screw 49 Nm (36 lb-ft)
Oil Strainer-to-Block 11 Nm (97 lb-in.)
Rear Crankshaft Oil Seal Case to Block Cap Screws 11 Nm (97 lb-in.)
Rear Crankshaft Seal Case to Oil Pan Spacer Cap Screws 9 Nm (80 lb-in.)
Let me know if you need anything else as I am here for you. Please remember to rate me as I strive to do my best in your rating helps me to achieve this
JON and other Small Engine Specialists are ready to help you
Customer: replied 2 months ago.
Would yoi know the intake and exhaust valve clearances for this same motor