How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Hank F. Your Own Question
Hank F.
Hank F., Technician
Category: Small Engine
Satisfied Customers: 15275
Experience:  Certified on Onan and Generac generators
19372534
Type Your Small Engine Question Here...
Hank F. is online now
A new question is answered every 9 seconds

I put a 4.5bgdfb30502m from a bucket truck in place of the

Customer Question

I put a 4.5bgdfb30502m from a bucket truck in place of the failed 2800 in my rv.someone has hacked the 4 wires from the remote start harness in the rv.the new 4.5 has a 6 plug harness for remote start.it did have an hr meter but I wont be using it.my question is,if I find the 2 wires from the rv that connect when pushed for start,then the 2 that connect when pushed for stop which in the 6 pole plug would I put then to?
JA: Do you have fuel in the tank? If so, is the shut-off valve open and the fuel clean?
Customer: runs perfect.just want remote start
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: no would just like the wiring info
Submitted: 2 months ago.
Category: Small Engine
Expert:  Hank F. replied 2 months ago.
Hello, my name is ***** ***** I am going to assist you with this.
You will only need 3 wires - a start, a stop and a common.
The top pin in the plug will be the common, the second pin down will be stop, and the third pin down will be start.