How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JON Your Own Question
JON
JON, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1200
Experience:  Certified Small Engine Technician
94737911
Type Your Small Engine Question Here...
JON is online now
A new question is answered every 9 seconds

I have a bent blade and I have changed them in the past but

Customer Question

I have a bent blade and I have changed them in the past but I can not get the nut off
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: I have tried both direction to hope it would break loose but no. Today I bent the blade. I have two replacement blades at home.
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: ideas on how to get the nut loose
Submitted: 4 months ago.
Category: Small Engine
Expert:  JON replied 4 months ago.

Hi, my name is ***** ***** me review the issue, and I will be more than happy to help resolve it as quickly as possible.

Expert:  JON replied 4 months ago.

block the blade with a block of wood and turn counter clockwise. It may have torqued it down since something was hit and may need a cheater bar on the end of ratchet