How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Vince O. Your Own Question
Vince O.
Vince O., Small Engine Technician
Category: Small Engine
Satisfied Customers: 2832
Experience:  Over 30 years experience repairing lawn and garden equipment. Chainsaws, mowers,blowers and trimmers
32407143
Type Your Small Engine Question Here...
Vince O. is online now
A new question is answered every 9 seconds

My EM 700is won't jump to high speed when I plug in a load.

This answer was rated:

my EM 700is won't jump to high speed when I plug in a load. I just feeds current to device at low speed.
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: about a month
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: no i don't think so

Hello, was there an error code?

Customer: replied 6 months ago.
No

Have you tested the switch?

Customer: replied 6 months ago.
No but it switches to hi speed manually with the switch.

What are you pugging into it?

Customer: replied 6 months ago.
table saw

I have the shop manual and not much was said about it. I did find this and not sure if it helps any. Also has a list of error codes and fixes

Vince O. and 2 other Small Engine Specialists are ready to help you