How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 13581
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I am trying to identify the model number of a Craftsman

Customer Question

I am trying to identify the model number of a Craftsman string edger. The only number on the block is###-##-#### It says it is LEHR powered.
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: I was just given the edger. It came from a family whose father the owner died. I am hoping to find an owners manual.
JA: Do you plan on doing the work yourself?
Customer: The unit is working, No repair needed, but could use an owners manual. I would like to change the cutter head from string to a blade if possible.
JA: Did you double-check the thermostat? And what about the unit's filters?
Customer: Air cooled, only filter is on the air intake for the carburetor
JA: Anything else we should know to help you best?
Customer: Not that I can think of.
Submitted: 10 months ago.
Category: Small Engine
Expert:  Donald replied 10 months ago.

Hello. Thank you for choosing Just Answer. My name is***** will be happy to assist you.

Expert:  Donald replied 10 months ago.

Could you possibly take a picture of your edger?

Expert:  Donald replied 10 months ago.

A picture will sometimes help to identify which unit you actually have.

Expert:  Donald replied 10 months ago.

I believe your trimmer is propane powered.