How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne, Engine Rebuilder
Category: Small Engine
Satisfied Customers: 9445
Experience:  many years on egine rebuilding, lawn mower,roto tiller,Truck,and small engines
Type Your Small Engine Question Here...
Wayne is online now
A new question is answered every 9 seconds

I took apart my Ryobi cs30 whip to replace the coil. when I

Customer Question

I took apart my Ryobi cs30 weed whip to replace the coil. when I reassembled the starter rope will not pull.
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: couple of hours putting together taking back apart.
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: don't think so
Submitted: 8 months ago.
Category: Small Engine
Expert:  Wayne replied 8 months ago.

Hi I'm Wayne

I wil tyr to help you with this

if you remove the plug will it spin over ??

Expert:  Wayne replied 8 months ago.


Should read I will try to help

Customer: replied 8 months ago.
have not tried
Customer: replied 8 months ago.
hello are you there?
Customer: replied 8 months ago.
taking out the plug does not help. still can not pull cord
Expert:  Wayne replied 8 months ago.

Hi Thank you

If the spark plug is removed

and will not pull the issue is in

the recoil starter , did you have that apart

Expert:  Wayne replied 8 months ago.


We should stay on this question

so you do not get charged for 2 questions

see if the flywheel will turn by hand,

may be tight on the coil