How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Briggs-Fan Your Own Question
Briggs-Fan, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1262
Experience:  over 15 years experience in small engine repair, multiple certifications
Type Your Small Engine Question Here...
Briggs-Fan is online now
A new question is answered every 9 seconds

Have preasure washer 020292 2200 max PSI Have leak in middle

Customer Question

have preasure washer 020292 2200 max PSI
Have leak in middle checkvalve, excessive leak under operation.
The check valves three of them have rubber housing around valve.
When I try to remove rubber comes apart. How can I remove the valve to change o rings.
Submitted: 8 months ago.
Category: Small Engine
Expert:  Briggs-Fan replied 8 months ago.

Hi my name is ***** ***** welcome to Just Answer.

Expert:  Briggs-Fan replied 8 months ago.

This should be your pump here

Expert:  Briggs-Fan replied 8 months ago.
Hi did you ever see the diagrams I sent ?
Customer: replied 8 months ago.
I received your parts list
I looking at dig A or check value kit
The 3 valves have a screw from outside of ass that covers the valve and spring inside. this screw in is rubber with threads
It's on too tight that the rubber gives way and crumbles
this screw in nut with rubber has o ring damaged
this is such a poor design. needs metEl hardware not rubber. how to remove w o destroying or are these three screws in the kit A? this should not be this diffcult, should order water inlet complete.
Customer: replied 8 months ago.
please I D part for three valves screw in rubber screws with o ringor water inlet assy
Expert:  Briggs-Fan replied 8 months ago.

It still looks like part a is it right ?