How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 13581
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I repalced the drive bely on a zt hd 52 and during the

Customer Question

i repalced the drive bely on a zt hd 52 and during the process had to bull slightly in a wire that goes into the pto now thee is a sparking sound and visual saprk when engine is running not normal is there an easy repair
JA: Can you guesstimate how old the engine is? And has it done anything like this in the past?
Customer: 2yr
JA: Do you plan on doing the work yourself?
Customer: only if its simple chageing the belt was an effort with a lift
JA: Anything else we should know to help you best?
Customer: no
Submitted: 9 months ago.
Category: Small Engine
Expert:  Curtis B. replied 9 months ago.

Welcome to JUST ANSWER small engines, let me try to help you !! I don't know it all, but maybe together we can get you a satisfactory answer!

Expert:  Curtis B. replied 9 months ago.

Spark at the pto clutch is not normal, and shows there is a short. Have to get the wire insulated, or away from where it is toughing bare wire to metal! Do you see bare spot?

Customer: replied 9 months ago.
No I haven't look int it a lot turned off and went to you
Customer: replied 9 months ago.
I will go check a see what I Andre and go from there. Then get back to ypu
Expert:  Curtis B. replied 9 months ago.

Wire is touching and shorting out. Has to be repaired, or you will burn up wiring harness!

Customer: replied 9 months ago.
will get back to you after checking it out
Expert:  Curtis B. replied 9 months ago.