How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Briggs-Fan Your Own Question
Briggs-Fan
Briggs-Fan, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1265
Experience:  over 15 years experience in small engine repair, multiple certifications
75998144
Type Your Small Engine Question Here...
Briggs-Fan is online now
A new question is answered every 9 seconds

We have a cub cadet model 1525 that has no power being fed

Customer Question

hi we have a cub cadet model 1525 that has no power being fed to yhe pto to engage blades. this model doesn't have a mow in reverse mode.
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: on and off for a month and it has been ittermitant to this point
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: I have replaced the relay and the on/off switch for the pto
Submitted: 11 months ago.
Category: Small Engine
Expert:  Briggs-Fan replied 11 months ago.

Hi my name is ***** ***** welcome to Just Answer. I see you have replaced the pto switch ,do you have power going to the switch ?

Customer: replied 11 months ago.
I believe i do if i unpkug it the mower wont start
Expert:  Briggs-Fan replied 11 months ago.
Ok with the tractor not running if you turn the key from off to on which should be right before start and hit the pto button is there a click or noise at all
Customer: replied 11 months ago.
No sound....
I did put 12v to pto manually and did get a click yesterday.
Expert:  Briggs-Fan replied 11 months ago.

I know the switch is new but have you pulled it and tested it ?

Expert:  Briggs-Fan replied 11 months ago.

Have you checked the new switch ?

Customer: replied 11 months ago.
not sure how to check it
Expert:  Briggs-Fan replied 11 months ago.

You should be able to use a digital multimeter