How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Briggs-Fan Your Own Question
Briggs-Fan, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1264
Experience:  over 15 years experience in small engine repair, multiple certifications
Type Your Small Engine Question Here...
Briggs-Fan is online now
A new question is answered every 9 seconds

I have a Troy Bilt 3000 PSI pressure washer that is two

Customer Question

I have a Troy Bilt 3000 PSI pressure washer that is two years old. the engine runs fine but while I was using it the pressure kept hesitating and finally it quit pumping at all. the water was on and flowing but the pressure washer quit pumping.
JA: What's the make and model of the pressure washer? And can you guesstimate how old it is?
Customer: 2 years old Troy Bilt Xp 3000 PSI. pump RMW 2.5G28 Annovi Reverberi is all I have found so far.
JA: Do you plan on doing the work yourself?
Customer: possibly
JA: Anything else we should know to help you best?
Customer: Let me know what other information I can provide.
Submitted: 11 months ago.
Category: Small Engine
Expert:  Briggs-Fan replied 11 months ago.
Hi my name is ***** ***** welcome to Just Answer.
Expert:  Briggs-Fan replied 11 months ago.

Do you have the model number on the pressure washer itself .

Expert:  Briggs-Fan replied 11 months ago.

With the motor off try removing the tip and see if you get ant water flow , you can also unhook the hone and gun from the pump and see if your getting water flow , keep the water on but engine off