How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Vince O. Your Own Question
Vince O.
Vince O., Small Engine Technician
Category: Small Engine
Satisfied Customers: 2839
Experience:  Over 30 years experience repairing lawn and garden equipment. Chainsaws, mowers,blowers and trimmers
32407143
Type Your Small Engine Question Here...
Vince O. is online now
A new question is answered every 9 seconds

Im looking up how to adjust my toro tbar systems? they work

Customer Question

im looking up how to adjust my toro tbar systems?
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: they work themselves loose fromtime to time the steering becomes sluggish
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: which is the steering adjustment and which is the brake??
Submitted: 10 months ago.
Category: Small Engine
Expert:  Vince O. replied 10 months ago.

Hello, what is the Toro model number?

Customer: replied 10 months ago.
Im sorry it's 30167
Expert:  Vince O. replied 10 months ago.

What is it doing? Pulling to one side? Slipping going uphill?

Customer: replied 10 months ago.
It has new drive belts and it's just not going The way it should. We shouldn't have to push it as much as we're having to
Expert:  Vince O. replied 10 months ago.

Have you checked the drive belt from trans to engine?

Expert:  Vince O. replied 10 months ago.

See page 35.

Expert:  Vince O. replied 10 months ago.

If cracked replace it and if ok remove it anyway and then grab a hold of the pto shaft from trans and check for wobble that could be a worn bearing in the case

Expert:  Vince O. replied 9 months ago.

Any luck? Were you able to view manual?