How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 13581
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

2002 dixon ztr 7025 hydro-static belt keeps coming off.

Customer Question

2002 dixon ztr 7025 hydro-static belt keeps coming off. Can't figure out why?
Submitted: 10 months ago.
Category: Small Engine
Expert:  Briggs-Fan replied 10 months ago.

Hi my name is ***** ***** welcome to Just Answer. Your deck belt keeps coming off right ?

Customer: replied 10 months ago.
replaced bearings followed manual to replace belt
Expert:  Briggs-Fan replied 10 months ago.

Has anything been struck with the deck while mowing ?

Customer: replied 10 months ago.
Its the hydrostatic belt.
Expert:  Briggs-Fan replied 10 months ago.

Is there any burrs on the pulleys ?

Customer: replied 10 months ago.
brand new pulleys also
Customer: replied 10 months ago.
cavalry belt
Expert:  Briggs-Fan replied 10 months ago.

Is the belt showing wear like where it could be rubbing wtc ?

Customer: replied 10 months ago.
none, brand new belt again
Expert:  Briggs-Fan replied 10 months ago.

When it pops off I mean ,

Customer: replied 10 months ago.
looks to be fine
Customer: replied 10 months ago.
will flip over then come off
Expert:  Briggs-Fan replied 10 months ago.

Was the original belt doing this ?

Customer: replied 10 months ago.
then replaced bearings, pulleys, and belt... own two of these machines they are both doing it now
Expert:  Briggs-Fan replied 10 months ago.

Doing more research this is a common problem for the Dixons . , although most say it's belt alignment. I'm still trying to find a fix

Customer: replied 10 months ago.
I have done research, but that is why I am here
Expert:  Briggs-Fan replied 10 months ago.

Ok let me opt put snd see if someone with more experience with Dixons can help you

Customer: replied 10 months ago.
tried
Customer: replied 10 months ago.
I am also a I.T.
Expert:  JON replied 10 months ago.

What is the part number for the new belt that was install?

How much movement does belt have when not running?