How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JON Your Own Question
JON, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1104
Experience:  Certified Small Engine Technician
Type Your Small Engine Question Here...
JON is online now
A new question is answered every 9 seconds

I have a Snapper eater Mod00 and I am trying to get the head

Customer Question

I have a Snapper weed eater Mod(###) ###-####00 and I am trying to get the head off so I can put another one on. What kind of threads is on the bolt
Submitted: 11 months ago.
Category: Small Engine
Expert:  JON replied 11 months ago.

Most trimmer s have left handed threads as when they run the head tightens itself. Try inserting rod in the slot and turning clockwise to remove the head.