How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 28914
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Jd l120. I an trying to replace the belt. There is one

Customer Question

jd l120. I an trying to replace the belt. There is one pulley that I can't get the belt back in. It has two metal pieces that are too close to the pulley to fit the belt in. I tried unscrewing the cap bolt to the pulley in the hope that I could lift the pulley up, put the belt around it and place it back down. The pulley doesn't appear to be able to be pulled up;
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

Look at the above link and tell me which pulley you are referring to? The pulley under the engine?

Expert:  Curtis B. replied 1 year ago.

I see question is still open , did you find my link and response?