How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 28074
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

The bearings in the clutch broke, I replaced it with a new

Customer Question

The bearings in the clutch broke, I replaced it with a new clutch from the dealer. After installation I pulled the PTO switch and nothing happened. The blades didn't engage, I checked for broken wires and I found none. "John Deere L120 Automatic" Any Assistance you give in this matter would be greatly appreciated.
Submitted: 11 months ago.
Category: Small Engine
Expert:  Curtis B. replied 11 months ago.

# 24 is pto relay. The system is the pto switch, the relay and the clutch. Do you have voltage at the switch?