How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 13581
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I was using a exmark laser 60in.cut stopped mower set brakes

Customer Question

I was using a exmark laser 60in.cut stopped mower set brakes cut off blades got off for just a min. when I try to cut again the blades won't start. after cutting motor off, it would not start back up (like the P T O was on).what could be problem?
Submitted: 1 year ago.
Category: Small Engine
Expert:  JohnF2015 replied 1 year ago.

Hi, my name is***** will be assisting you.

It sounds like your battery is low. In order for the blades to operate you need to have at least 7 volts of battery charge. At 7 volts of battery charge the engine is not going to start, not even crank, although you may hear a click when trying to start.